LEGERING - Part Six
THE METHOD FEEDER
The first five parts of this legering series looked at
pretty standard rigs that can be adapted for a number of
species. In this part I’m going to show you the Method feeder
which, in fishing terms, is a relatively new development that
took the angling world, and in particular the commercial carp
match fishing scene, by storm a few years ago. It is primarily
a rig for catching carp from pools and lakes with a relatively
high stock density of fish, though specimen anglers are now
adapting the Method to target large tench and bream and the
river angler is using it to catch barbel.
What is a Method Feeder?
Basically, a Method feeder is a weighted frame or cage
around which a firm mixed groundbait is moulded. It is
normally fished ‘in-line’, creating a bolt rig effect, which
means that when a fish takes the hookbait it hooks itself
against the weight of the feeder and bolts, which in turn
leads to quite spectacular bites.
The purpose of the Method is to get carp to attack the ball
of groundbait and pick up your hookbait, which is either
inside the ball of groundbait or in very close proximity to
it.
The Tackle
I consider there to be two distinct styles of Method feeder
fishing, one is what I term as ‘the match Method’ and the
second the ‘specimen Method’, neither of which can exactly be
described as delicate. The feeders themselves weigh somewhere
in the region of 1oz to 3oz before any groundbait is moulded
around them, so just casting one requires a rod that has a
fair amount of backbone. And because hard-fighting carp are
the most common target the rod has to be up to the job of
landing them.
The match Method is the style used on commercial fisheries
for targeting smallish stocked carp, generally up to a maximum
of 10lb in weight (commonly known as ‘pasties’) which requires
the use of a heavy feeder rod fitted with a quivertip. The
reel needs to be a robust fixed spool type capable of carrying
100yds of 8lb breaking strain line. A ‘4000’ size reel is
ideal. It needs a smooth and reliable clutch system too
because some of the bites you can expect are just awesome and
you need to be able to set the clutch to give line smoothly at
the appropriate time.
The specimen Method is a heavier version used in
conjunction with conventional carp rods in the 2.5lb to 3lb
test curve (TC) range to handle the bigger carp, or if tench
or bream are the target stepped up (heavier/stronger) Avon
rods with a test curve of around 1.75lb to 2lb are generally
preferred. These are usually fished specimen style on rod
rests or rod pods with electronic bite alarms and bobbin type
indicators. Reels are usually of the free spool, baitrunner
type loaded with line between 8lb and 15lb breaking strain
depending on the size of fish expected.
The ‘Match Style’ Method
There are many variations of the match style Method feeder
available today, but essentially they are based on the same
basic concept. The feeder itself is a cage or coil
construction around which groundbait is squeezed. Most styles
have a length of pole type elastic running through the centre
with a swivel or connecting ring on each end. The mainline is
tied to the top swivel and the hooklink is tied to the bottom
creating a fixed in line rig. The purpose of the elastic is to
absorb the shock of a hard taking, bolting carp, preventing
the hook pulling out of the fish’s mouth.

The Match Method
Feeder |
The
mainline should be no less than 8lb breaking strain. Due to
the stresses involved in casting the heavy feeder and dealing
with hard-fighting fish you should never really go lower than
this, especially as these feeders are essentially fixed and if
the line breaks above the feeder a fish will find it difficult
to free itself from the rig. The answer to this is to fish
with a strong enough mainline so as to absolutely minimise the
possibility of breaking off in the first place. The mainline
should always be of a higher breaking strain than both the
hooklink and the elastic that runs through the feeder.
The key to a successful Method feeder rig is the length of
the hooklink. It is fished very short, only 3 inches or so in
length. As a gauge, if you can fold the hooklink back over the
groundbait loaded feeder and the hook touches the mainline,
it’s too long! This is for two reasons. The primary reason is
that you want your hookbait to be very close to the ball of
groundbait moulded around the feeder. The second reason is
that if the hooklink can reach the mainline it will be prone
to tangling up on the cast, something you definitely want to
avoid.
The hooklink should again be strong but, as stated above,
of lesser breaking strain than the mainline. A 6lb bs hooklink
is about right with 8lb mainline. I prefer to use a high tech
reduced diameter mono line for my hooklinks. The hook itself
should be a strong forged pattern matched to the size of the
hookbait.
The ‘Specimen Style’ Method
Although the principle involved is the same, the specimen
Method is really a beefed up version of the match style and
the design of the specimen Method feeder is slightly different
to the match type. It is designed very much like an in-line
carp weight with vanes attached to which the groundbait is
moulded and is set up exactly as a standard in-line carp rig
would be. There is no elastic shock absorber on these style of
feeders, the mainline instead passes right through the centre
of them and attaches to a swivel that pulls back into the
feeder creating a semi-fixed bolt rig. Most anglers using
these feeders also incorporate a length of anti-tangle tubing
on the line above the feeder.

The Specimen Method
Feeder |
As with
the match style a very short hooklink is used for exactly the
same reasons as above. However, many anglers prefer to use
carp style braided hooklinks, especially if rigging the bait
on a hair rig.
The Groundbait
In all previous articles in First Class Fishing I have
avoided talking too specifically about bait, and particularly
about groundbait, concentrating as far as possible on the rigs
themselves. In this instance though I am going to look in some
depth at the groundbait because it is virtually an integral
part of the Method rig and the whole reason why the rig is
being used in the first place.
Let’s look first at what we are trying to achieve in simple
terms, using the assumption that we are fishing in warm,
summer conditions when carp are quite active. What we want is
to cast out a food parcel that is attached to our line. We
want that food parcel to sit on the bottom and attract carp to
it. We want the carp to start nudging and pecking at the food
parcel to get a mouthful of food. Although we want them to get
at the food we don’t want to make it easy for them, we want
them to have to work at it, almost provoking them into getting
a bit on the aggressive side with it. We want our hookbait to
be in close proximity and be readily accepted by the feeding
carp, indistinguishable from other parts of the food parcel.

The Loaded Method
Feeder |
This gives
us a number of challenges. What we need to provide is an
attractive groundbait for the carp that will stick to the
feeder on the cast, will not break up as it hits the water and
sinks to the bottom, but will break down when left in the
water for a little while, say 15 minutes or so, and will also
break up when carp start to have a go at it. It also needs to
contain a number of particles that match our hookbait, so it
appears that our hookbait is just another particle in the
bundle.
You are probably getting the message by now that this
groundbait requires special qualities and careful preparation
and you wouldn’t be wrong. However, by following some simple
guidelines and remaining aware of your objective, it’s not
actually that difficult to do.
To start with there are a number of high quality Method
groundbait mixes on the market readily available from your
local tackle dealer that have the necessary balance of food
item ingredients and binders. For someone using the Method for
the first time this is by far the best place to start. Having
said that, tailoring your proprietary groundbait by making
some additions is also very easy.
So let’s look more closely at what makes a successful
summer Method groundbait mix. The one single important point
here is to get the mix to the right consistency. Mix it too
dry and it either won’t stick to the feeder or is likely to
break up on impact with the water after casting. A too wet mix
though will make the bait too sticky and it won’t break up
easily enough. If you retrieve your feeder and a lot of the
mix is still sticking to the cage then it’s likely that you
made it too wet.
But by following the instructions on the packet you will be
directed on how to achieve a mix that gives us what we want -
a firm, slightly damp groundbait that easily moulds on to the
feeder but breaks down when attacked by carp or in about
fifteen minutes on its own.
On arriving at the water it’s often best to make mixing the
groundbait your first job as it takes a while to get all the
water absorbed properly. By letting it stand for 15 minutes or
so while you tackle up is a good thing as you may have to add
a bit more water before starting fishing. Make sure you get a
consistent mix by rubbing the crumb between your hands to
remove lumps or better still by passing it through a
groundbait riddle.

Mixing Method Feeder
Groundbait |
As I
said above, you can tailor mixes rather than just use them ‘as
is’ from the packet. In addition to the straight mix you can
put in particles to boost the attraction and holding power of
the groundbait. Mixing in hemp seed, carp pellets, sweetcorn,
broken boilies, casters, dead maggots, etc, can give your mix
an edge. Certainly mixing in samples of what you are using on
the hook is a good idea, making your hookbait look like just
another particle in the mix. You can also add flavourings to
the water used for mixing, maybe something sweet like
molasses, or use the water left over from boiling the hemp.
Another top idea is to liquidise a tin of sweetcorn and use
that to wet your mix. One thing, do not use live maggots in
your groundbait as their wriggling will break up your mix.
Hookbaits
The nice thing about carp, particularly pastie sized carp,
is they eat virtually anything, therefore just about any type
of bait that you can get to stay on your hook will catch them.
It’s probably better to look at this from a point of view of
what you don’t want to catch and use something that you know
smaller fish, for example, will not pick up.
The most popular hookbaits include carp pellets; either the
soft, hookable ones or dry ones fished on a hair rig or bait
band, sweetcorn, paste, luncheon meat and boilies. Check if
boilies are allowed on your water though, a lot of commercial
fisheries ban them.
Fishing the Method
With your groundbait mixed and hookbait selected it’s time
to fish. Mould the groundbait to the feeder, pushing the crumb
firmly into the cage producing a small, compact ball of bait.
When you have a the feeder loaded you can just leave the
hookbait hanging free, but I like to fold the hooklink back
over the groundbait and secure it by pressing a bit more of
the mix on top, trapping the hookbait tight against the ball
of groundbait. You can even bury the hookbait inside the ball
of groundbait so it only becomes visible to the carp when the
ball breaks down.
As with any form of fishing, accurate casting is the key.
Try to hit the same spot every time you cast, for this will
encourage the carp to congregate in a small area of your swim
and compete for the available food.

Carp caught on Method
Feeder |
On most
waters there are features that will be natural holding or
patrol areas for the carp. Commercial fisheries very often
have islands and a Method feeder cast to the margins of an
island is often very productive, particularly if there is an
overhanging bush or foliage that provides cover too. Look for
these features and make use of them. In the absence of obvious
features just ensure that you are careful with the casting and
consistently feed to the same spot in open water. However,
don’t be tempted to use your reel’s line clip to achieve this
or you will end up getting broken. Read on and you will
understand why.
When fishing the match version of the Method set yourself
up so that you can sit with your rod tip at about 45 degrees
to the cast feeder. With standard stillwater quivertipping you
would normally set up with your rod tip virtually at right
angles to the feeder to spot the slightest deflection in the
soft tip, but for Method feeders this is not necessary as the
bites are most often unmissable. Set the rod tip in a rest,
the butt on your knee and keep your hand on the rod at all
times unless you fancy a swim to retrieve it from a fast
retreating carp. Also ensure that the clutch on your reel is
correctly set to give line.
Quite often when fishing the match Method you will
encounter the rod tip bouncing and pinging about for a while
in small deviations. Ignore these indications, but tighten
your grip on the rod as a proper bite probably isn’t far away.
These indications are caused by interested carp nudging the
feed ball or catching a fin on the line. A proper bite is
usually indicated by the rod tip pulling savagely round in an
unmistakable manner as the fish picks up the hookbait,
encounters the weight of the feeder and bolts away, hooking
itself in the process. Just lift in to the fish and let the
rod and clutch of the reel slow it down until that first run
is under control. Hence, don’t use the reel’s line clip!
For the specimen version the principles are basically the
same. The only difference is that two or more rods can be used
at the same time and the rods are placed on parallel rests.
Free spool or baitrunner reels allow the rods to sit safely
without any danger of being pulled in and bobbins in
conjunction with electronic alarms take the place of the
quiver for bite indication.
So, whether you fancy a go at the either the match or
specimen options I’m sure you will be in for a very
entertaining time. Give the Method feeder a try for some
exciting fishing.
That’s it for this legering series. Next time in First
Class Fishing I will be starting a new series on the topic of
Pole Fishing. Part 1 will be looking generally at what a pole
is, the uses of a pole and how to go about choosing your first
one. See you then.